Apply non-coloured MARBILO using the Stainless Steel Trowel, leaving a thickness of about 1.5 – 2 mm. Next, while still wet, run the Brush over the surface, by pressing the bristles on the surface with irregular movements in order to create discontinuous veining. After about 20 – 30 minutes, when the product starts to dry, smooth the surface with the Stainless Steel Trowel with multiple movements and increasing the pressure as the coating continues to dry. Continue until the surface is partially smooth, leaving visible the notches created earlier and the irregular veining. Next, use a pointed tool (i.e. screwdriver) to create the grouting effect of the desired size, typical of the cutstone marble slab. After 24 hours, when the MARBILO is completely dry, apply the first coat of undiluted transparent JN Colour Therapy Clearcoat 80 by using a compact sponge on the smooth surface leaving the veining and notching. After 4 hours apply a second finishing coat of coloured JN Colour Therapy Clearcoat 80, with 50% dilution. After this, while the clearcoat is still wet, remove the excess product on the smooth part using the sponge (which has been washed and well-squeezed), in order to obtain the Natural Stone Effect, due to the different levels of absorption of the surface.